Click For Crochet Abbreviations List

Sizes: SML-XL-XXL-XXXL.
You will need: 850-950-1050-1150-1250-1400 g of type-Drops Nepal yarn from Garnsiudio (65% wool, 35% alpaca, 75 m / 50 g); hosiery and circular (40 and 80 cm) knitting needles No. 5, hosiery and circular knitting needles (80 cm) Мv4-for elastic, garter and knit; 8 buttons.

Knitting technique. Knitting density: 17 p. And 22 p.
front surface = 10 × 10 cm.
Garter stitch (straight and back rows): faces. and out. ranks - LP.
Garter stitch (in circular rows): alternately 1 circle row - LP, 1 circle, row - IP.

Patterns 1 and 2: knit according to the corresponding patterns 1 and 2 (see your size). The pattern on the diagrams is shown on the front side. 1st row of the scheme -
Note. Due to the weight of the yarn, all measurements should be made on the product, having previously hung it so that it is not too long when finished.
Additions (on a garter stitch along the waistline): add 1 p., Performing 1 yarn, in the next row yarn, knit the LP for the back arch to avoid holes.

Description of work
The main part. Knit the back and in front of one part, in straight and reverse rows on circular knitting needles, to the armholes.

On knitting needles N = 4, dial 252-268-296-324-352-380 p. (Including 1 chrome. P. On each side along the edges of the front). Knit 1 out. a number of IPs and continue to work with an elastic band on faces. side as follows: 1 chrome. n. garter stitch, * 2 drugs, 2 PI *, repeat from * - * to the last 3 items, finish 2 drugs and 1 chrome. n. garter stitch. Continue to knit with an elastic band this way. At a height of 5 cm, knit 1 person. a number of drugs, at the same time evenly reduce 60-64-76-84-86-94 p. (i.e., knit together the drug every 2nd and 3rd p.) = 192-204-220-240- 266-286 p. Knit the following purl and front rows of PL. Go to circular knitting needles No. 5 and place two marker threads on the part, through 51-54-58-63-71-76 p. On each side of the middle of the front (= 90-96-104-114-124-134 p. Of the back between markers) - move markers as you work. Knit the next out. row thus: 1 chrome.
viscous, pattern 2 according to the pattern {= 35 p. for sizes S + M + L + XLh
43 p. for sizes XXL + XXXL), persons. smooth surface (= PI in the back rows, PL in the face rows) to the last 36-36-36-36-44-44
p., finish with pattern 1 (= 35 p. for sizes S + M + L + XL and 43 n. for sizes XXL + XXXL) and 1 chrome. n. garter stitch. Continue the work by performing the pattern this way.
At a height of 7 cm, reduce 1 p. On each side of both markers (= 4 p. Reduced). Repeat the reduction every 4.5 cm, only 9 times = 156-168-184-204-230-250 p. After 5 vertical rapports of patterns 1 and 2 (the height of the part is now 46 cm), go to the circular knitting needles N = 4. Next, knit garter stitch straight and back rows on all loops (1st row = PL on the wrong side); at the same time, evenly decrease 22-22-24-24-26-26 p. 6 of the 1st r. = 134-146-160-180-204-224 p. When there are 2 rows left before the height of the scarf knit reaches 6 cm, add 22-22-24-24-2-26-26 p evenly (see "Technique knitting ") = 156-168-184-204-230-250 p. Go to circular knitting needles No. 5 and continue work, performing patterns, as before. At the same time, at a height of 59-60-61-62-63-64 cm (see note), close 6 p. On each side for armholes (i.e. 3 p.
for each front part, then finish the front and back parts separately.

Back: = 66-72-80-90-100-110 p. Continue to knit with the front smooth surface in straight and reverse rows, at the same time, close 3 for the armhole at the beginning of each row on both sides. 0-0-0-0- 1-2 times, 2 p. 0-1-2-3-4-4 times and 1 p. 2-2-3-4-3-4 times = 62-64-66-70-72-74 p. At a height of 77-79-81-83-85-87 cm, close the middle 24-26-26-26-26-28-28 p. For the throat and finish each side separately. Close 1 p. Along the edges of the neck in the trail. row = 18-18-19-21-21-22-22 p. for each shoulder. Continue in this way to a height of 79-81-83-85-87-89 cm and then close the hinges.

The right side of the front: = 39-42-46-51-59-64 p. Continue to work with the pattern according to the pattern and the faces are smooth, at the same time close the loops for the armholes at the beginning of each row on the side, as on the back.! After 3-3-3-3-4-4-4 vertical rapports of patterns 1 and 2, continue to work with the wrong side (as on the faces. Side) for 15 p. “Berry motif” (knit the remaining loops, as before).

At the same time, at a height of 69-71-73-73-75-77 cm (the next row should be wrong side), reduce 5 p. On 3 braids from the front edge, knitting 2 p. Together IP on each braid. Following, close to the middle of the front, close 4-5-5-5-6-6 p. For the neck. Close the loops for the neck at the beginning of each row from the side of the middle of the front as follows: 2 p. 3 times 1 p. 3 times = 19-19-20-22-25-26 p. For each shoulder. Continue to knit until 1 row remains until the final measurements (as on the back). Now evenly reduce 1-1-1-1-4-4 stitches on the braids of the shoulders, knitting 2 stitches together LP = 18-18-19-21-21-22-22 stitches on the spoke for each shoulder. Close the loop in the next row.
The left side is in front. Knit symmetrically to the right side.

Sleeves. Knit in a circle. On stocking knitting needles No. 4, dial 54-63-63-63-72-72 p. And tie 1 circle, a row of PL. Next, knit with an elastic band in this way: * 2 LP, 2 PI, 2 LP, 3 PI *, repeat from At a gum height of 3 cm, reduce all 3 PI to 2 PI = 48-56-56-56-64-64 p. Continue to knit with an elastic band 2 LP / 2 PI to the height of the elastic band 10 cm. Now tie 1 circle, a row of LPs, at the same time, evenly reduce 8-14-14-14-14-20-20 p. = 40-42-42-42-44- 44 p. Knit 1 circle, a row of PIs, then switch to Na 5 stocking needles and continue the work of individuals. smooth surface (in a circle, rows - all loops of the LP). At the same time, at a height of 12-12-13-14-12-13 cm, add 2 p. In the middle of the sleeve from the side of the armhole. Repeat additions every 3.5-3.5-2.5-2-2-1.5 cm, total 10-10-13-15-16-19 times = 60-62-68-72-76-82 p At a height of 48-47-47-46-44-43 cm, close 6 P. In the middle of the sleeve from the side of the armhole and then close for the sleeve okata at the beginning of each row on both sides 2 P. 2-3-3-4-4-5 times and 1 p. 2-2-2-3-3-4-4 times , then 2 points on both sides to a height of 55-55-56-56-56-56 cm. Now close 3 points at the beginning of the next. 2 R. and close the remaining loops. The total sleeve height = 56-56-57-57-57-57 cm. The second sleeve is connected in the same way.
Assembly. Perform shoulder seams, sew in sleeves.

Plank of the right side of the front. Raise the faces. side 165-181 p. (a multiple of 4 + 1) along the right front edge on circular knitting needles Ns 4 (lift the loops inside the chrome. loop). Knit LP 1 out. row and 1 persons. row. Continue to work with the rubber band, starting from the wrong side, in this way (= from the neck towards the lower edge): 1 chrome. p., ”2 PI, 2 LP *, repeat from * - * to the last 4 p. and finish 2 PI and 2 p. of garter stitch. Continue to knit with an elastic band in this way up to a height of 2.5 cm. Next, make 8 buttonholes, distributing them evenly on the bar. 1 buttonhole: close 1 point and dial 1 new loop in the next. row (for a more accurate result, perform buttonholes in the area from the IP on the faces. side). Place the lower buttonhole at a distance of 16-18 cm from the lower edge, and the upper one at a distance of 1 cm from the neckline.
Plank left front. Knit like a right side part, but don’t do the buttonholes. Make sure the number of stitch loops is the same.
Collar. Lift to circular knitting needles No. 4 by persons. to the side of 95-120 p. around the neckline (including at the short ends of the slats), Knit PL 1 out. row and 1 persons. row, at the same time evenly add the number of loops to 122-126-130-138-142-150. Continue to knit with elastic band. side this way; 2 p. Garter stitch, * 2 LP, 2 PI *,
repeat from * _ * to the last 4 p. and finish 2 bows and 2 p. garter stitches (this side will be front when the collar is bent down). At a collar height of 16 cm, add all 2 IP elastic bands to 3 IP (count as faces. Side, when the collar is bent down). At a collar height of 20-21-21-21-22-22-22 cm, add all 3 PIs to 4 PIs. Close the loop according to the drawing at the height of the collar 24-26-26-26-26-28-28 cm.