Fiona

KNOWLEDGE SILVER GRAY CARDIGAN FREE PATTERN

Click For Crochet Abbreviations List

Sizes Russian: 44/46 (50/52) 

You will need: 600 (700) g of silver-gray yarn (52% natural wool, 48% cotton; 120 m / 50 g); Knitting needles number 4.5 and 5; 2 pairs of metal clasps with a size of 30 mm. 

Knitting technique. 
Gum: an odd number of loops. Facial rows: chrome., Alternately 1 front, 1 purl, finish 1 front, chrome. In the purl rows of the loop knit by drawing. 

Wrong surface: front rows - back loops, purl rows - front loops. 
The front smooth surface: front rows - front loops, purl rows - purl loops. 

Openwork pattern A: the number of loops is a multiple of 12. Knit according to scheme 1, on which the front rows are given. In the purl rows, knit the loops according to the pattern, knit the nakida with the purl. Rapport constantly repeat. Run 1 time 1–34th row.

Openwork pattern B: the number of loops is a multiple of 12 + 6. Knit, like an openwork pattern A according to scheme 1. A repeat repeat and finish with the first 6 loops of the repeat. Run 1 time 1–34th row. 

Cross gum: 2 rows of purl satin, 2 rows of facial satin, 2 rows of purl satin = 6 rows. 

The pattern with holes A: the number of loops is a multiple of 4. Knit according to scheme 2, on which the front rows are given. In purl rows stitches loops and nakida; purl; from 2 nakidov in a row, the 1st nakid is knitted with a purl, the 2nd one - purl with a crossed one. Start from the loop before rapport, repeat constantly, repeat the loop after rapport. Constantly repeat the 1-4th p.

The pattern with holes B: the number of loops is a multiple of 4 + 2. Knit as a pattern with holes A according to scheme 2. Start with a loop before repeat, repeat the report, finish with last loop after repeat. Constantly repeat 1st to 4th rows. 

Rhombus on 18 loops: knit according to the scheme 3, on which the front rows are given. To knit the loops in the purl rows according to the pattern, knit the nakida with the purl. Run 1 time 1–48th row. 

A pattern of rhombuses: the number of loops is a multiple of 24 (26 + 4). Knit: 3 (6) n. Front smooth, * 18 n. Rhombus, 6 (8) n. Front smooth, from * constantly repeat, 18 n. Rhombus, 3 (6) n. Front smooth.

Sequence of patterns A: 2 rows of purl stitch, 34 rows of openwork pattern A, 6 rows of transverse elastic, 28 rows of patterned with holes A, 6 rows of transverse elastic, 48 rows of patterned rhombus, 6 rows of transverse elastic, 28 rows of patterned with holes A, 6 rows of transverse elastic band, 34 rows of openwork pattern A, 6 rows of transverse elastic band, 6 rows of front satin finish = 210 rows.

Sequence of patterns B: 2 rows of purl stitch, 16 rows with openwork pattern A (B), with 1 time performing 1–16th rows of scheme 1, 6 rows with transverse elastic, 28 rows with holes pattern A (B), 6 rows of transverse with a rubber band, 48 rows with a rhombus pattern (for the 2nd size finish 4 p. of the front smoothing), 6 rows with a transverse elastic band, 28 rows with a pattern with holes A (B), 6 rows with a transverse elastic band, 34 rows with an openwork pattern A (B), 6 rows of transverse elastic, 6 rows of the front surface = 192 rows. 

Sequence of patterns C: 30 rows with a pattern with holes B, 6 rows with a transverse elastic band, 48 rows with a pattern with rhombuses, 6 rows with a transverse elastic band, 30 rows with a pattern with holes B = 120 rows.

Patent edge. Facial rows: the first and last 3 loops knit facial. Purl rows: remove the first and last 3 loops as purl, while stretching the thread in front of the loops and tighten tightly so that the edge spins inwards. 

Hollow cord strap. 
Left edge of work: * knit the 1st loop of the patent edge with the previous loop together with the front one, then do not pursue the row, but return the loop to the left needle, from * repeat continuously until the number of loops specified in the instruction is reduced.
Right edge of work: * knit the last loop of the patent edge with the next loop together with the front one tilted to the left (1 loop to remove, like the front one, 1 front, then stretch it through the removed loop), then not carry out the wrong side, but return the loop to the left needle, from * constantly repeat until the number of loops indicated in the instruction is reduced. 

Knitting density 
The front, purl surface and a pattern of rhombuses: 18.5 p. And 28 p. = 10 x 10 cm; 
Openwork patterns A and B: 18.5 p. And 27 p. = 10 x 10 cm; 
Patterns with holes A and B: 18.5 p. And 23.5 p. = 10 x 10 cm; 
Transverse elastic: 6 rows = 2 cm; 
Patent edge: 3 s. = Width 0.5 cm. 

DESCRIPTION OF WORK

Back: on needles No. 4.5, dial 99 (111) points with a cross set and, after the corresponding purl row, tie a 3.5 cm rubber band for the slat, while in the last row, subtract 1 item = 98 (110) item. Continue work on knitting needles number 5 and between the edge knit according to the sequence of patterns A. After 78.5 cm = 210 rows from the initial row, close the outer 27 (31) n for shoulders, leave the middle 44 (48) n for the neck.

Left shelf: on the spokes No. 4.5, dial 52 (58) paragraph with a cross-shaped dial and, after the corresponding purl row, tie a 3.5 cm strap as follows: chrome, 48 (54) section with an elastic band, starting with 1 face and finish 1 purl, 3 p. patent edge. To continue work on the needles No. 5 as follows: chrome. 48 (54) section according to the sequence of patterns B, section 3. patent edge. After 62 cm = 164 rows from the strip, for the neck along the left edge of the work, make a strip of a hollow cord, to do this, subtract 1 x 12 p., Then in each 2nd row subtract 1 x 2 p. And 8 x 1 p. (1 x 3 n., 1 x 2 n. and 7 x 1 n.). After 72 cm = 192 rows from the plate close on the left edge of the work the first 27 (31) points for the shoulder, leave the remaining 3 points of the patent edge. 

Right shelf: knit the same as the left shelf, but in mirror image.

Sleeves: dial the needles No. 5 for each sleeve in 48 (56) sections with a cross-shaped set and continue the work between the edge ones according to the sequence of patterns C after the corresponding back row and distribute the pattern of rhombuses from the middle (= 18 cm on the middle 18 , on both sides knit the remaining loops according to the pattern). After 5 cm = 12 rows from the initial row add 1 pt for the bevel of the sleeves on both sides, then in each 8th row 13 x 1 p. According to the pattern = 76 (84) p. 46 cm = 120 rows from the initial row close all loops as facial.

Assembly: perform shoulder seams. From the left loops of the patent edge of both shelves, perform on the loops of the half neck of the back, respectively, a strip of hollow cord; slats of both shelves combine in the middle of the backrest. Then sew the stitches with knit stitches. Sew the sleeves, complete the seams of the sleeves and the side seams on the upper 31 (29) cm. Leave the lower 30.5 cm back and 24 cm of the shelves open for lateral cuts. From the inner side, fasten metal fasteners to the sides of the shelves, sew the upper fastener at the beginning of the neck, and fasten the 2nd fastener 8 cm below.


Post your comment

Information!  You need to be a member to comment. You can easily sign up from here.

0 comments