Bianca

Womens knitted pullover free pattern

Click For Crochet Abbreviations List

Dimensions: 
Bosom of the finished product - 81.5 (91.5, 101.5, 111.5, 122, 132, 142, 152.5, 162.5) cm. 

Used yarn: 
Knit Picks Galileo (50% wool, 50% viscose; 120 m / 50 grams in a hank) - 13 (13, 14, 15, 16, 17, 18, 19, 20) hanks. 

Tools: 
Circular knitting needles No. 2.75 and No. 3.25 and sets of double-edged knitting needles No. 2.75 and No. 3.25, tapestry needle, loop markers, loop holders, crochet hook and auxiliary thread for a preliminary set of loops. 

Knitting density: 
31 loops and 38 rows = 10 cm of the pattern with bundles after the steaming; 
24 loops and 38 rows = 10 cm of the front surface after steaming. 

The main part of the pullover: 
Dial 264 (296, 320, 340, 372, 396, 420, 456, 484) loops with a preliminary set of loops. 

Attach the working thread and tie the row with front loops with the needles No. 2.75. Connect loops in a circular row.
Tie 9 rows with face loops. 
Tie 1 row with purl loops (fold row). 
Go to the needles number 3.25. 
Installation row: * 13 (14, 17, 21, 26, 26, 30, 39, 45) face loops, 106 (120, 126, 128, 134, 146, 150, 150, 152) loops of the 1st row of the harness panel , 13 (14, 17, 21, 26, 26, 30, 39, 45) face loops *, place the marker, repeat from * to * on the hinges of the backrest. 

Link 8 circular rows in the prescribed manner, knitting the central loops with a pattern of a panel of harnesses and loops on both sides of the pattern - with the front satin stitch.

9th row: remove the auxiliary thread from the preliminary set of loops, put the loops on the free knitting needle, tuck the bottom edge to the wrong side, bending the row of the loops, the knitting needle with the opened loops should be behind the working needle, twist 2 loops together until end of the row: 1 loop with a working needle and 1 loop with a back needle. 

Next, knit in the prescribed manner. Rows 153-160 repeat throughout the armhole and neckline. Close the loop for the armhole, then continue to knit the panel with the harnesses, while at the same time diminishing the loop for the neckline. 

A total of 236 (268, 292, 312, 344, 368, 392, 428, 456) loops on the needles, 118 loops each (134, 146, 156, 172, 184, 196, 214, 228) for the backrest and the front. 

Armhole:
Knit up to 2 (2, 2, 3, 3, 5, 7, 9, 11) loops before the right armpit marker, close the next 4 (4, 4, 6, 6, 10, 14, 18, 22) loops, remove the marker . Repeat the same thing in front of the left armpit marker - on the needles of 114 each (130, 142, 150, 166, 174, 182, 196, 206) loops for the back and for the forehand. 
Place the backrest loops on the loop holder. To knit further only loops before the direct and inverse rows. 

Front: 
Tie 1 facial row. 
A series of double reductions for the armhole: 

Facing a row: 3 loops knit together the front with a slope to the right, knit in the prescribed manner up to the last 3 loops, 3 loops knit together the facial with a slope to the left.

Purse row: 3 loops knit together purl the back walls, knit in the prescribed manner up to the last 3 loops, 3 loops knit together purl. 

A series of simple reductions for the armhole: 

Facing a row: 2 knit the loops together with the front one with a tilt to the right, knit in the prescribed manner up to the last 2 loops, 2 loops of the knit together with the facial with the inclination to the left. 

Purlit: knit 2 loops together purl the back walls, knit in the prescribed manner up to the last 2 loops, knit 2 loops together purl.

Perform double decrements in each row 1 (1, 1, 2, 4, 2, 4, 7, 7) times; perform simple reductions in each row 4 (4, 5, 7, 6, 6, 7, 7, 11) times, then in every 2nd row 2 (3, 4, 3, 6, 5, 2, 5, 6 ) times, then in each 3rd row 2 (0, 3, 3, 2, 3, 4, 2, 2) times. 

Only for size 81.5: 

Link 6 rows. Perform a series of simple reductions for the armhole - 92 loops left. 

Only for size 91.5: 

Run 2 times the number of double decreases in every 4th row; connect 7 rows, perform a series of simple reductions for the armhole - 102 loops are left. 

For size 101.5 only: 

Link 6 rows. Perform a series of simple reductions for the armhole - 112 loops left. 

Only for size 111.5:

Link 6 rows. Perform a series of simple reductions for the armhole - 114 loops left. 

Only for size 122: 

Link 3 rows. Perform a series of simple reductions for the armhole - 120 loops left. 

Only for size 132: 

Link 4 rows. Perform a series of simple reductions for the armhole, tie 7 rows, perform a series of simple reductions for the armhole - 134 loops left. 

Only for size 142: 

Run 2 times simple decrease in every 5th row - 136 loops left. 

Only for size 152.5: 

Perform 2 times double increments in every 4th row - 136 loops left. 

Only for size 162.5: 

Link 5 rows. Perform a series of simple reductions for the armhole - 138 loops left. 

For all sizes:

Link another 15 (7, 13, 17, 22, 25, 26, 32, 33) rows. 


Neckline: 
Tie 40 loops (41, 46, 47, 49, 54, 55, 55, 56), close the next 12 (20, 20, 20, 22, 26, 26, 26, 26) loops, knit the loops to the end row. 

Continue to knit the right side of the neckline, performing a subtraction, as indicated below. Attach the thread from the second ball to the left side of the neckline and tie the two parts at the same time. 

Double drops for neckline: 

Facial row: knit up to the last 3 loops of the left side of the neckline, 3 knits knit together the face with a slope to the left. Tie 3 loops together with the front one with a tilt to the right with the thread from the 2nd coil, knit the loops to the end of the row (to the right armhole).

Purlit: knit until the last 3 loops of the right side of the neckline, knit 3 loops together with the purl; 3 loops together purl the back walls, knit the loops to the left armhole. 

Simple additions for neckline: 

Facial row: knit up to the last 2 loops of the left side of the neckline, 2 knit the loops together with the front one with a slope to the left; knit 2 loops together with the front with a slope to the right, knit the loop to the right armhole. 

Purlit: knit until the last 2 loops of the right side of the neckline, knit 2 loops together with the purl; 2 loops together purl the back walls, knit the loops to the left armhole.

Perform double decrements in each row 4 (3, 2, 5, 2, 4, 3, 3, 3) times; perform simple reductions in each row 2 (5, 5, 5, 6, 2, 4, 4, 5) times, then in each 2nd row 4 (3, 4, 3, 4, 4, 5, 6, 4 ) times, then in each 3rd row 2 (2, 2, 3, 3, 3, 2, 2, 3) times - 24 (25, 31, 26, 32, 37, 38, 37 , 38) loops, reduced by 16 (16, 15, 17, 17, 17, 17, 18, 18) loops. 

Shoulder bevel formation: 

1st shortened row (front): knit with a set pattern to the last 7 (8, 9, 9, 10, 11, 11, 11, 12) loops before the right shoulder, twist the next loop and turn the knitting. 

2nd shortened row (purl): knit a set pattern to the last 7 (8, 9, 9, 10, 11, 11, 11, 12) loops in front of the left shoulder, twist the next loop and turn knitting.

3rd shortened row: knit a set pattern to the last 7 (8, 9, 9, 10, 11, 11, 11, 12) loops before the last loop, loop the next loop and turn the knitting. 

4th shortened row: knit the established pattern to the last 7 (8, 9, 9, 10, 11, 11, 11, 12) loops before the entwined loop, twist the next loop and turn the knitting. 

Next row (front): knit all the loops with the front ones, lifting the entwining threads on the knitting needle and tying them together with the loops that they twist around. 

Cut the thread and transfer the shoulder loops to the loop holder or to the auxiliary thread. 

Back:
Move 114 (130, 142, 150, 166, 174, 182, 196, 206) backrest loops from the loop holder to the spokes. Attach the thread on the front row. Carry out the formation of an armhole as described for the front part - 92 (102, 112, 114, 120, 134, 136, 136, 138) loops are left on the spokes. 

Connect another 47 (42, 47, 51, 57, 64, 68, 70, 73) rows. 

The following front row: tie 25 (26, 32, 27, 33, 38, 39, 38, 39) loops, close the next 42 (50, 48, 60, 54, 58, 58, 60, 60) loops, knit the loops to end of row.

Turn knitting and knit up to 2 loops in front of the edge of the neckline of the left part, knit 2 loops together with a purl. Attach the thread from the second ball to the right side of the neckline; 2 knit the first stitches together purl the back walls, knit the loop to the end of the row. For each shoulder, 24 (25, 31, 26, 32, 37, 38, 37, 38) loops remained. 

To form the bevel of the shoulder for the front. Do not cut the thread. 

Connection of the shoulder loops: 

Turn the work to the wrong side and close all the shoulder loops using the backrest thread and the method of closing the loops with three knitting needles. 

Assembly: 
Insert the sleeve sleeves into the armholes, aligning the center of the sleeve with the shoulder seam and the beginning of the sleeve's neck with the beginning of the armhole. Pin with pins and then sew the sleeve. 

Collar:
On the front side, use knitting needles No. 2.75, starting from the right shoulder seam, dial and knit facial 2 loops until the first closure of the loops on the neckline of the back of the back, 42 ​​(50, 48, 60, 54, 58, 58, 60, 60) loops along the closed loops neckline of the back of the neck, 2 loops to the left shoulder, 42 (50, 48, 60, 54, 58, 58, 60, 60) loops along the neckline of the front to the right shoulder - just 88 needles (104, 100, 124, 112, 120, 120, 124, 124) loops. Place the marker and connect the loops in a circular row. 

Tie a 5 cm rubber band 2 x 2 (2 face loops, 2 purl loops). 

Cut the thread, leaving a long end. Unscrew the elastic on the wrong side and, using the end of the thread, sew the edge of the elastic to the dial. 

Thread the ends of the threads. Strike a female knitted pullover.
































Post your comment

Information!  You need to be a member to comment. You can easily sign up from here.

0 comments