Click For Crochet Abbreviations List

suit Size: 44 
You will need 
400 g Fleurdelise yarn (No. 374, 80% super kid mohair, 20% polyamide, 25 g x 250 m). 150 g of Perle 8 yarn (No. 35 and No. 910, 100% Mako cotton, 340 mx 50 g) of each color. 
Silk yarn Nacar (No. 437 and No. 1 402, 100% viscose, 50 gx 157 m) 100 g each color. 
500 g of Giada yarn (No. 31, 78% cotton, 17% polyamide, 5% polyester, 50 g x 115 m). Wide elastic band for the belt. 9 buttons in the form of glass beads. 
Spokes number 3, number 4 - 4.5 - 5. Hook number 1.5. 

Jacket 
Caution! The description is given when the density of knitting the front surface with the needles No. 4: 21 p. X 30 p. = 10 x 10 cm. In order to avoid errors and make the product of the desired size and shape, we recommend that before starting work to bind the sample, determine its density and, if necessary, make corrections to the proposed description.

For the back, type on the needles No. 4 Giada yarn No. 31 87 loops and knit with a face stitch. Form the side bevels as follows: in the 12th row, knit 2 face loops together on both sides of the two sides. Then 2 times, 2 sections along with each edge through 8 rows. Continue straight ahead. After 90 rows from the bottom edge, close for an armhole on both sides: 1 time 4 p., 1 time 3 p., 1 time 2 p., 1 time 1 p.

Next, knit straight 44 rows, then start to form a neck. On the front side, knit 27 loops with the front, 7 s. Close, 27 faces. Then knit the left side: on the side of the neck, close 1 time 4 p., 1 time 3 p., 1 time 2 p., 1 time 1 p. At the same time, start to form a bevel of the shoulder: after you have closed 3 loops on the side of the neck, close for shoulder 2 times 6 p., 1 time 5 p. Close right shoulder symmetrically to the left.

Next, follow the right shelf, on the needles No. 4 with Giada No. 31 yarn, dial 28 loops and knit with the front side stitch. On the left side for rounding up, add 8 loops (44 loops) in each second row 8 times. At the same time, from the right side in the 12th row from the typesetting edge, lower 1 loop, then 2 times in 8 rows on the 1st loop. Next, knit straight. After 102 rows from the bottom edge (the shelf fits longer than the back, since there is an increase on the chest), start to make reductions for the armhole: 1 time 4 p., 1 time 3 p., 1 time 2 p.1 time and 1 p. knit a V-shaped neck on the left side, lowering on the left side 1 loop in the 6th row 2 times, 8 times in the 4th row. Only 52 rows. At the same time, in the 46th row, close the shoulder in 3 steps: 2 times 6 points, 1 time 5 points. Knit the left shelf symmetrically.

Next, knit the sleeves. To do this, use Giada's yarn No. 31 on the needles No. 4, put in 45 loops and knit 90 rows with stocking, forming side bevels as follows: add 1 s in each 8th row from both sides. Next, do the downs for the armhole. On both sides, subtract 1 time 4 p., 1 time 3 p., 1 time 2 p. Next, subtract one loop at the end of each row until there are 5 loops on the spoke. Close these loops. Connect the parts on the shoulders and sides. Sew the sleeves.

Make a crochet jacket around the perimeter: 1st row: sc, 2nd and 3rd row: make a decorative stripe like a skirt with Nacar yarn (see above). Bind the edge with a “stride step”. Tie the bottom of the sleeve in the same way, then knit the frill: 9 rows with the front stitch of Fleurdelise No. 374 yarn. On the edge of the frill, use # 1,5 crochet Perle 8 yarn. Sew buttons to the left shelf. Use the openwork holes of the decorative strip as loops. 

Skirt The 
product is made of two parts.
Start knitting with a hemming, which is done as follows: on the needles No. 4, type 81 loops of Giada yarns, knit 6 rows with the front satin stitch, and the seventh row, follow the needles No. 5, because the canvas will be bent at this point. Tie 6 more rows with the front satin with knitting needles No. 4. Then fold the canvas (with the wrong side inwards) along the row that was knitted with larger knitting needles, and knit the front loops, picking up the bottom of the canvas: lift one loop of the dial chain onto the working needle, place before each loop and knit them together with the face loop. 

Carefully ensure that the loops vertically coincide, otherwise the edge of the product will be skewed. You got a double cloth (skirt belt) into which the elastic band is then inserted.

Continue the work of the front satin, the needles number 4, at the same time adding from both sides on a loop, in every sixth row. After 28 rows, you get 89 loops. Close all loops. Take the hook number 3 and tie a decorative strip of Nacar No. 402 yarn along the closed edge as follows: * knit 1C1H, 2 VP and 1 С1Н into the same base loop in the loop of the base. Skip the next loop of the base. * Repeat from * to *. Thus, perform 1 row with color No. 402 and 1 row with color No. 437.

Further from the decorative strip, knit ruffles with Fleurdelise yarn No. 374, a thread in two additions. First knitting needle number 3, dial loops, knitting on the edge of the base, from one VP, two face loops. Continue the work of stocking stitch spokes number 4,5. After completing 10 rows, the eleventh row (front), knit with purl loops (on this relief row then we knit ruche). Then tie the 5 rows of the front satin stitch. The sixth row (front) is again performed by purl loops. Finish work with 9 rows of the front surface. Close all loops. 1st frill ready.

The second and third ruffles are performed similarly, starting from knitting decorative strips with crochet, Nacar yarn as described above. The fourth frill knits shorter, only 10 rows of the front surface, Fleurdelise yarn, then all the loops are closed. The second part of the skirt fits similarly and is sewn with the first on the sides. Next, knit ruffles (yarn Perle 8 crochet number 1.5) from the front side on those loops that were knitted with the wrong side. Perform one ruff on the frill with color No. 35, the other with color No. 910. 

Also trim the edge of the skirt with ruffle. Knit the ruche like this: * 1 SBN, 1VP, knit 5 C1H into one loop of the base through 2 loops of the base, between “picot” of 3 VP, 1 VP, between two loops of the base *, repeat from * to *.

Source